Computers are the most essential part of our daily activities. While the system reduces the burden, Windows errors usually disrupt the tasks and consume time. If time is an issue, troubleshooting might look daunting. Error code 0xc00000f is the common error that irritates the users. You may not have friends and colleagues available every time to help you in the situation. Hence, to save your time and scout different sites for the solution, we bring you a one-stop solution, containing the meaning, reasons behind occurring the error code 0xc00000f, and successful solutions to fix the error.
Let’s start with the meaning of the error code 0xc00000f.
Error Code 0xc00000f: Introduction
Error code 0xc00000f is a common error for all sorts of Windows versions. Users usually report this error and struggle to troubleshoot it.
This error almost appears after an operating system update or installation of a new program. It means that the Windows operating system was unable to complete its startup. Before we discuss the solutions to error code 0xc00000f, let’s understand the causes behind it.
Causes of Error Code 0xc00000f
When you face error code 0xc00000f, you need to fix it as early as possible as it is directly related to your computer’s boot manager. When it happens, your operating system will not be able to read the booting configuration data because of the following reason.
- Corrupted file due to power failure
- Damaged Data Cables
- Disk Write Error
- File missing from the system due to malware and virus attack
A typical error would like in the following way-
\Windows\system32\winload.exe Error code: 0xc000000f
How to Fix Error Code 0xc00000f?
The good thing is there is no single solution to this error. In this post, we have gathered all possible solutions to fix the error code 0xc00000f. Only you have to see which method is best suitable depending on the specific cause of the error. So try them one by one until the problem gets solved.
Solution 1: Rebuild the BCD Manually
BCD is the main cause behind error code 0xc00000f. Many users commit mistakes when they try to rebuild the BCD. To avoid mistakes while rebuilding the BCD, check the following steps:
Step 1. Go to the menu, scroll and follow the following instructions to boot the computer in “Windows Setup”.
Step 2. Next, quickly select “Command Prompt” from the variable options.
Step 3. Now type the command ‘bootrec/rebuildbcd’ to start to build BCD.
Step 4. This will start an auto-scan to build a BCD file.
Step 5. Finally, reboot your system and check if the error persists again.
Solution 2: Change Power Cord and Remove External Devices
A damaged power cord can cause error code 0xc00000f as the power supply is interrupted. It is advisable to check the power cord, change if it is damaged, and also remove all external devices from the computer. Follow the below steps to perform it properly.
Step 1. First of all, Turn off the device and disconnect it from the power source.
Step 2. Now check the power cord if there is any wear or tear. Replace the cables if you find any damages and if it looks healthy perform the following steps.
Step 3. Remove all connected devices from the computer like microphones, USB, dongle, webcam, and other electronic accessories.
Step 4. Now power on the device and try again.
Solution 3. Check Your Data Cables, BIOS, and Drivers
Error code 0xc00000f includes complexity as the reason behind the error is not certain. There are instances when you are tired of all methods. At that time, checking your data cables, BIOS and Drivers are apparent. If you find something went wrong with your accessories, you are more likely to fix the annoying error code 0xc00000f. Check how to do it in a simple way:
Step 1. Remove all data cables from the system.
Step 2. Apply ‘Restore factory Settings’ in BIOS.
Step 3. After doing this, restart your PC now.
Step 4. Now open BIOS again with the help of these keys: Esc, Del, F2, F8, or F12.
Step 5. Toggle all three modes or a successful combination until you bump up into the following screen .
Solution 4. Check Your Disk With the CHKDSK Utility
This is possible that your hard drive’s file consumption is distributed. Fixing the error can remove error code 0xc00000f. Look at the simple steps to resolve the problem.
Step 1. Use the Windows install key to boot the system.
Step 2. Choose the date, language, and keyboard input and repair your computer.
Step 3. Select Windows installation drive: C:\, and press Next.
Step 4. Next System Recovery Options box appears on the screen, choose Command Prompt from there and type ‘chkdsk C:/f’.
Suggestion– If Windows is not installed, you can replace the letter ‘C’ with the letter of the driver.
You can see this kind of page.
Solution 5. Launch Startup Repair
Whether you’re confronting error code 0xc00000f Windows 7, 8, 10, or 11, you can initiate startup repair via Windows installation DVD to scan the system for finding the damages or corrupted files. Check with the following steps.
Step 1. Shut down your computer, insert the Windows installation DVD into your system CD-ROM drive.
Step 2. Press any key to boot from CD or DVD.
Step 3. Choose the language and keyboard layout, then click ‘Repair Your Computer’.
Step 4. Now select the operating system and click Next.
Step 5. Choose ‘Startup Repair’ from the list.
In the end, the Startup Repair will begin scanning your installation for known issues and will attempt to repair the problems.
These are different solutions depending on different problems. All solutions will ultimately fix error code 0xc00000f. So figure out the problem with your system and choose the right solution to fix the problem.
If you need help while attempting the solutions or are unable to find the reason behind error code 0xc00000f, contact Pre PC Solution for a favor without hesitation. It is the one-stop solution to get instant support regarding types of technical and non-technical problems. Avail our services now!